Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 127 / 396

X Turn socket
;
for dipped-beam headlamps
anti-clockwise and remove.
X
Remove the bulb from socket
;
.
X
Insert a new bulb into socket
;
.
X
Insert socket
;
and tighten by turning clock-
wise.
X
Press on housing cover
:
and tighten by
turning clockwise.
X
Replace the cover in the front wheel arch
(
Y
page 124).
Main-beam headlamp/side lamps/
parking lamps/daytime driving lamps
View from inside (example: left headlamp)
X
Switch off the lighting system.
X
Open the bonnet.
X
Turn housing cover
:
anti-clockwise and
remove.
X
Pull out the bulb together with socket
;
.
X
Insert the new bulb with socket
;
and
engage it as far as the stop.
X
Position housing cover
:
and tighten by turn-
ing clockwise.
X
Close the bonnet.
Turn signal
View from inside (example: left headlamp)
X
Switch off the lighting system.
X Open the bonnet.
X Turn socket
:
anti-clockwise and remove.
X Pull bulb out of socket
:
.
X Insert a new bulb into socket
:
.
X Insert socket
:
and turn it clockwise until it
engages.
X Close the bonnet.
Side-mounted additional turn signal
lamp
The additional turn signals are mounted on the
side of the vehicle's front wings.
X Switch off the lighting system.
X Slide additional turn signal
:
forwards and
swing it out.
X
Press the bulb to the rear.
X
Apply light pressure to the bulb, turning it anti-
clockwise and remove it from the socket.
X
Press the new bulb into the socket and screw
it in clockwise.
X
Attach additional turn signal
:
at the front
and engage.
Replacing bulbs: vehicles with halogen headlamps
125
Lights and windscreen wipers
Z