Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 124 / 396

Rear interior and load compartment lights in the
roof lining or side trim panel
Bulb type: T10 6W Xenon
X
Switch off the interior light.
X
Press in the spring catch of lamp lens
:
with
a suitable object, e.g. a screwdriver, and then
prise off lamp lens
:
with lamp housing
=
.
X
Press in spring catches
;
and pull lamp
lens
:
off from lamp housing
=
.
X
Remove bulb
?
from lamp housing
=
.
X
Insert new bulb
?
.
X
In the case of load compartment lamps with a
button, align lamp lens
:
such that its open-
ing is above the button of lamp housing
=
.
X
Position lamp lens
:
on lamp housing
=
and
engage.
X
Position lamp lens
:
with lamp housing
=
on the left and engage.
Additional interior lighting and sur-
round lighting
The scope of the additional interior and ambient
lighting depends on your vehicle equipment. The
bulb change described here is valid for:
R
the mirror lamp in the sun visor
R
the ambient lamp at the bottom of the front
door
R
the ambient lamp inside the tailgate
You can find information on changing the bulb of
the signal and ambient lamp at the bottom of the
tailgate under “Signal and ambient lamp in the
tailgate" (
Y
page 123).
Type of lamp: W 5 W
X Press in the spring catch of lamp housing
:
with a suitable object, e.g. a screwdriver, and
prise off lamp housing
:
.
X Turn socket
;
anti-clockwise and remove
from the lamp housing
:
.
X Remove bulb
=
from socket
;
.
X Press new bulb
=
into socket
;
.
X Screw socket
;
clockwise into the lamp
housing
:
.
X Position lamp housing
:
on the left-hand
side and engage.
122
Replacing bulbs: interior lighting and ambient lamps
Lights and windscreen wipers