Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 328 / 396

Display message
Engine oil level: reduce oil level
The oil level is too high.
X
Action: have excess oil siphoned off.
Display message
For eng. oil level: switch on igni‐
tion
X
Action: turn the key to position 2 in the
ignition lock.
Display message
Waiting period not observed
X
Action: repeat the engine oil measurement
after about five minutes if the engine is at
normal operating temperature.
X
Repeat the engine oil measurement after
about 30 minutes if the engine is not at
normal operating temperature.
Display message
Engine oil level Unavail. if eng. on
X
Action: switch off the engine when it is at
normal operating temperature and wait
approximately five minutes before measur-
ing the engine oil level.
Checking the oil level electronically
(vehicles with steering wheel buttons)
Only vehicles with an engine output of 100 kW or
more (models 114 CDI/BlueTEC to 119 Blue-
TEC) can check the oil level electronically via the
on-board computer.
If at extremely low temperatures no engine oil
level is displayed after five minutes, repeat the
engine oil level check after another five minutes.
If an oil level reading is still not displayed, check
the engine oil level with the dipstick
(
Y
page 327). Have the engine oil level checked
at a qualified specialist workshop.
To check the level, the ignition must be turned
on and the engine must be shut off once it rea-
ches operating temperature. The vehicle must
be parked on a level surface. Use the steering
wheel buttons.
X
Park the vehicle on a level surface.
X
Switch off the engine.
X
Wait for five minutes.
X
Turn the key to position 2 in the ignition lock.
X Press the
=
or
;
button to select the
Service
menu.
X Use the
9
or
:
button to select
Engine oil level
.
X Press
a
to confirm.
The
Engine oil level Measuring now
Only accurate if vehicle is level
dis-
play message appears in the display while the
engine oil level measurement is in progress.
The display may show the following messages
after the engine oil level measurement.
Display message
Engine oil level OK
–
X
Action: do not top up oil.
Display message
Add X.X l engine oil when next refu‐
elling
–
X
Top up with the amount of oil
X.X l
shown
(
Y
page 328).
X
Action: check the engine oil level again
after a few minutes.
Display message
Engine oil level: reduce oil level
–
The oil level is too high.
X Action: have excess oil siphoned off.
Display message
For engine oil level: switch on igni‐
tion
–
X
Action: turn the key to position 2 in the
ignition lock.
326
Engine compartment
Maintenance and care