Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 123 / 396

Rear interior light with reading lamp
in the handles
:
Rear interior light and reading lamp
;
Switches the reading light on and off
Load compartment lamp with button
Load compartment lamp with button
:
c
Switches the load compartment light-
ing on/off
If your vehicle is fitted with a load compartment
lamp with a button, you can switch all the load
compartment lamps on or off using the
c
button in this load compartment lamp.
Regardless of the position of the switch, the load
compartment lighting can be switched on/off
centrally using the
w
button in the overhead
control panel (
Y
page 120).
Replacing bulbs: interior lighting and
ambient lamps
General notes
It is essential that the important safety notes on
changing light bulbs are observed
(
Y
page 123).
Have the bulbs of the following interior lights
replaced at a qualified specialist workshop only:
R
lights for the footwell lighting
R
lights for the overhead control panel in the
dashboard
R
lamps in the rear compartment grab handles
R
in the Tourer, the boot lamp in the roof lining
R
for a panel van, the LED light strip in the load
compartment
Otherwise, the lamps, their brackets or the side
trim panel and roof lining may be damaged.
If you require help when changing bulbs of other
interior lights, please visit a qualified specialist
workshop.
Rear compartment and load compart-
ment bulbs
You cannot change the following bulbs yourself:
R
in a Tourer, the bulbs in the boot lamp and in
the rear interior lights in the grab handles
R
for a panel van with LED light strip in the load
compartment, the LED light strip
Have these bulbs or the LED light strip changed
in a qualified specialist workshop only.
Information on changing the boot lamp bulb in
the side trim panel of vehicles with a load com-
partment stowage tray can be found under
"Additional interior and ambient lighting"
(
Y
page 122).
Replacing bulbs: interior lighting and ambient lamps
121
Lights and windscreen wipers
Z