Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 227 / 396

Allow an overheating engine to cool down
before opening the bonnet. If there is a fire in
the engine compartment, leave the bonnet
closed and notify the fire brigade.
Use the buttons in the instrument cluster.
X
Press È to select the
?
coolant temper-
ature bar display.
Under normal operating conditions and with the
specified coolant level, the coolant temperature
display:
R
may rise to 110 † on vehicles with an engine
output of under 100 kW
R
may rise to 120 † on vehicles with an engine
output above 100 kW
AdBlue
®
level menu
The display is only available for BlueTEC
®
vehi-
cles.
Use the buttons in the instrument cluster.
X Press È to select the
AdBlue level
display.
The display shows the level of AdBlue
®
.
You can find information on refilling AdBlue
®
under "Refuelling" (
Y
page 174).
Settings menu
Introduction
Settings menu start screen
The vehicle must be stationary. Use the buttons
in the instrument cluster.
X
To display: press È to select the
Settings
menu.
The
Settings
menu is only displayed when the
vehicle is stationary. You can think of the order
of the submenus and functions as a circle. Press
3
on the instrument cluster to scroll through
the menu, starting with its start screen and
select its submenus or functions successively.
If you scroll forward using
3
, the setting from
the previous submenu or function is adopted.
If you press
È in a submenu, the submenu or
function is exited without adopting the setting.
The display then shows the start screen of the
Settings
menu.
Depending on the vehicle’s equipment, you have
the following options in the
Settings
menu:
R
Setting the language for the display messages
and displays (
Y
page 226)
R
Deactivating and activating ESP
®
(
Y
page 226)
R
Setting the sensitivity of the rain sensor
(
Y
page 226)
R
Activating and deactivating ATTENTION
ASSIST (
Y
page 226)
R
Activating and deactivating Intelligent Light
System (
Y
page 227)
R
Setting permanent SPEEDTRONIC
(
Y
page 227)
R
Selecting the permanent display in the dis-
play's header (not for United Kingdom)
(
Y
page 227)
R
Setting the unit for distance, consumption
and speed displays (
Y
page 227)
R
Setting the time and date (
Y
page 228)
X
To reset settings to the factory settings:
turn the key to position 1 in the ignition lock
On-board computer (vehicles without steering wheel buttons)
225
On-board computer and displays
Z