Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 344 / 396

Cleaning the sensors
! Do not use dry, coarse or hard cloths and do
not scrub. You will otherwise scratch or dam-
age the sensors.
If you clean the sensors with a high-pressure
cleaner or steam cleaner, observe the infor-
mation provided by the manufacturer regard-
ing the distance to be maintained between
the vehicle and the nozzle of the high-pres-
sure cleaner.
X
Clean drive system sensors
:
with water, car
shampoo and a soft cloth.
Cleaning the reversing camera
! Do not use dry, coarse or hard cloths and do
not scrub. You could otherwise scratch or
damage the lens of the reversing camera.
When cleaning the vehicle with a high-pres-
sure or steam cleaner, observe a minimum
distance of 50 cm to the reversing camera. Do
not aim directly at the reversing camera. You
could otherwise damage the reversing cam-
era.
Make sure that you do not apply any wax to
camera lens when waxing the vehicle. If neces-
sary, remove the wax using water, shampoo and
a soft cloth.
Vehicles with rear doors
X
Clean camera lens
:
with clean water and a
soft cloth.
Vehicles with a tailgate
X
Make sure that the engine is switched off and
the key is in position 2 in the ignition lock.
X
Engage reverse gear or shift the transmission
to position R.
The reversing camera flap opens.
X
Clean camera lens
:
with clean water and a
soft cloth.
Cleaning the sliding door
The care instructions do not apply to electric
sliding doors.
342
Care
Maintenance and care