Windscreen wipers
Switching the windscreen wipers on/
off
!
Do not operate the windscreen wipers when
the windscreen is dry, as this could damage
the wiper blades. Moreover, dust that has col-
lected on the windscreen can scratch the
glass if wiping takes place when the wind-
screen is dry.
If it is necessary to switch on the windscreen
wipers in dry weather conditions, always
operate them using washer fluid.
!
If the windscreen wipers leave smears on
the windscreen after the vehicle has been
washed in an automatic car wash, this may be
due to wax or other residue. Clean the wind-
screen with washer fluid after an automatic
car wash.
!
Intermittent wiping with rain sensor: due to
optical influences and the windscreen becom-
ing dirty in dry weather conditions, the wind-
screen wipers may be activated inadvertently.
This could damage the windscreen wiper
blades or scratch the windscreen.
For this reason, you should always switch off
the windscreen wipers in dry weather.
1
$
Windscreen wipers off
2
Ä
Intermittent wipe, low (rain sensor set
to low sensitivity)
3
Å
Intermittent wipe, high (rain sensor
set to high sensitivity)
4
°
Continuous wipe, slow
5
¯
Continuous wipe, fast
B
î
1st pressure point – single wipe; 2nd
pressure point – wipe with washer fluid
X
Turn the key to position
1 or 2 in the ignition
lock.
X
Turn the
í
wiper switch to the corre-
sponding position.
In the
Ä
or
Å
positions, the appropriate
wiping frequency is set automatically according
to the intensity of the rain. In the
Å
position,
the rain sensor is more sensitive to precipitation
than in the
Ä
position, causing the wind-
screen wipers to wipe more frequently.
The windscreen will no longer be wiped properly
if the wiper blades are worn. This may prevent
you from observing the traffic conditions. Infor-
mation on replacing the wiper blades can be
found under "Replacing wiper blades"
(
Y
page 129).
Switching the rear window wiper on/
off
1
b
Wipes with washer fluid
2
°
Intermittent wipe
3
$
Rear window wiper off
4
b
Wipes with washer fluid
X
Turn the key to position
1 or 2 in the ignition
lock.
X
Move the
è
switch to the corresponding
position.
If the rear window wiper is activated, the
è
symbol is shown in the status area of the dis-
play.
128
Windscreen wipers
Lights and windscreen wipers
Содержание Vito 109 CDI/BlueTEC
Страница 1: ...Vito Operating Instructions Mercedes Benz Vito...
Страница 394: ...Permissible trailer load unbraked 750 kg Permissible nose weight 100 kg 392 Vehicle data Technical data...
Страница 396: ...Order no 6463 7355 02 Part no 447 584 22 03 Z102 Edition 03 17 4475842203Z102 4475842203Z102...