Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 261 / 396

Display messages
Possible causes/consequences and
M
Solutions
Â
You need a new key
The key needs to be replaced.
X
Visit a qualified specialist workshop.
¥
Top up washer fluid
The washer fluid level in the washer fluid reservoir has dropped below
the minimum.
X Top up the washer fluid (
Y
page 331).
Display messages (vehicles with steering wheel buttons)
Introduction
Important safety notes
G
WARNING
If the instrument cluster has failed or malfunctioned, you may not recognise function restrictions
relevant to safety. The operating safety of your vehicle may be impaired. There is a risk of an
accident.
Drive on carefully. Have the vehicle checked at a qualified specialist workshop immediately.
The on-board computer only shows messages or warnings from certain systems in the instrument
cluster display. You should therefore make sure your vehicle is operating safely at all times. If the
operating safety of your vehicle is impaired, stop the vehicle as soon as possible, paying attention
to road and traffic conditions. Then contact a qualified specialist workshop.
Display messages with graphic symbols are simplified in the Operating Instructions and may differ
from the symbols in the display. The display shows high-priority display messages in red. A warning
tone sounds with certain display messages.
Please respond in accordance with the display messages and follow the additional notes in these
Operating Instructions.
You can hide low-priority display messages using the
a
or
%
steering wheel button. The
display messages are then stored in the message memory. Rectify the cause of a display message
as soon as possible.
High-priority display messages cannot be hidden. These messages will continue to be shown in the
display until their cause has been eliminated.
Message memory
The on-board computer stores certain display messages in the message memory. You can call up
the stored display messages. Use the steering wheel buttons.
X Press
=
or
;
to select the
Service
menu.
X Press
:
or
9
to select
messages
.
The line shows the number of stored messages.
X
Press
a
to confirm.
The first stored display message appears in the display.
If there are no display messages, the display shows
No messages
.
Display messages (vehicles with steering wheel buttons)
259
On-board computer and displays
Z