Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 94 / 396

make sure that no one has any parts of the
body within the closing area.
When you lock the vehicle, you can close the
side windows at the same time.
The key must be close to the driver's door han-
dle.
Observe the notes on the automatic reversing
feature for the side windows (
Y
page 90).
X
Convenience closing feature: point the tip
of the key at the driver's door handle.
X
Keep the
&
button pressed until all side
windows are fully closed.
X
Make sure that all side windows are closed.
X
To interrupt convenience closing feature:
release the
&
button.
Resetting the side windows
You must reset the side windows if there has
been a malfunction or an interruption in the volt-
age supply.
X
Turn the key to position 2 in the ignition lock.
X
Pull the two power window switches and hold
for approximately one second after closing
the side window.
X
If the side windows remain closed after the
button has been released, they have been
reset correctly. If this is not the case, repeat
the steps above for the open window.
Opening and closing the sliding win-
dow
X
To open/close: press pinch grips
:
together and move the sliding window to the
desired position.
The pinch grips must engage audibly and fit
flush when the window is closed.
Problems with the side windows
G
WARNING
If you close a side window again immediately
after it has been blocked or reset, the side
window closes with increased or maximum
force. The reversing function is then not
active. Parts of the body could be trapped in
the closing area in the process. This poses an
increased risk of injury or even fatal injury.
Make sure that no parts of the body are in the
closing area. To stop the closing process,
release the switch or push the switch again to
reopen the side window.
If you cannot completely open or close a side
window:
If there are no objects or leaves in the window
guide that prevent the sliding sunroof from clos-
ing, there has been a malfunction or the on-
board voltage has been interrupted.
X
Reset the side window (
Y
page 92).
92
Side windows
Opening and closing