Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 100 / 396

Seating variants facing forwards
Seating variants in the face-to-face position
EE
EASY-ENTRY/EXIT feature
S/L Seat/berth combination
BV Bed extension
If a rear bench seat is marked with EE in the
illustrations, a rear bench seat must be fitted
with the EASY-ENTRY/EXIT feature in the posi-
tion indicated.
If a rear bench seat is not marked, a rear bench
seat can be fitted with or without an EASY-
ENTRY/EXIT section in the position indicated.
Please observe the following conditions for safe
rear seating:
R
Only use rear bench seats approved for the
vehicle.
R
A rear bench seat with three seats without
EASY-ENTRY/EXIT feature may only be fitted
if there is no other row of rear seats behind it.
R
A rear bench seat may only be fitted facing the
rear if each seat has a seat opposite it – face-
to-face position.
R
Vehicles with individual seat anchorages
in the vehicle floor:
-
Either only standard bench seats or only
comfort bench seats may be fitted. Mixed
fitting is not permitted.
-
Passengers may only use the seats if the
rear bench seat has engaged correctly
(
Y
page 103).
R
Vehicles with a seat rail system in the
vehicle floor:
-
Either only comfort rear bench seats or only
the seat/bunk combination (S/L) may be
fitted. Mixed fitting is not permitted.
-
Passengers may only use the seats if the
rear bench seat has engaged correctly
(
Y
page 104).
EASY-ENTRY/EXIT feature
G
WARNING
If the rear bench seat is not fully engaged, it
may be thrown about while the vehicle is mov-
ing. There is a risk of an accident and injury.
Always make sure that the rear bench seat is
fully engaged as described.
G
WARNING
When adjusting a seat, you or another vehicle
occupant could become trapped by the guide
rail of the seat, for instance. There is a risk of
injury.
Make sure that no one has any part of their
body within the sweep of the seat when
adjusting it.
98
Seats
Seats, steering wheel and mirrors