Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 99 / 396

Seat anchorages with quick-locking mechanism
(example: three seat anchorages per row of rear
seats)
You can secure rear bench seats in seat ancho-
rages
:
.
If your vehicle is equipped with four seat ancho-
rages in the first row of rear seats, the rear
bench seats can be secured in the face-to-face
position.
Example: seat rail system with quick-locking mech-
anism
Guide rails
;
of the seat rail system allow you
to:
R
fit rear bench seats in up to two rear seat rows
R
fit both rear bench seats facing each other
R
move the rear bench seats
The only way to ensure that the rear bench seats
will engage securely is to always keep the seat
anchorages clean and free of foreign objects.
Seating variants
G
WARNING
If the rear bench seats are not installed as
described, the safety precautions integrated
into the rear bench seats cannot protect as
intended. There is an increased risk of injury.
Only install the rear bench seats as described.
Only use rear bench seats approved for the
vehicle.
Depending on the type of seat anchorage in the
vehicle floor, you can fit rear bench seats with
two or three seats or fit the seat/bunk combi-
nation with three seats.
Depending on the vehicle equipment, you can fit
the rear bench seats in the first and/or in the
second row of seats.
The seating variants shown are only permitted if
the conditions named below for safe rear seat-
ing are met. Other seating variants are not per-
mitted and can endanger the occupants.
Seats
97
Seats, steering wheel and mirrors
Z