Mercedes-Benz Vito 109 CDI/BlueTEC, Руководство по эксплуатации

Страница: 352 / 396

Make sure that:
R
The jump leads are not damaged.
R
Bare parts of the terminal clamps do not come
into contact with other metal parts while the
jump leads are connected to the battery.
R
The jump leads cannot come into contact with
parts such as the V-belt pulley or the fan.
These parts move when the engine is started
and while it is running.
Jump leads and further information regarding
jump-starting can be obtained from any quali-
fied specialist workshop.
Before reconnecting the jump leads
X Apply the parking brake.
X
Vehicles with automatic transmission:
shift the transmission to position P.
X
Vehicles with manual transmission:
engage neutral.
X
Switch off all electrical consumers, e.g. audio
equipment, blower.
X
Turn the key to position 0 in the ignition lock
and remove it.
X
Open the bonnet (
Y
page 323).
Connecting the terminal clamp
X
Push contact protection cover
:
of the jump-
starting connection point backwards against
the spring force as far as it will go.
The jump-starting connection point is visible.
Terminal connection diagram
X
Remove the cover from positive terminal
=
of the donor vehicle's battery.
X
Connect the positive terminal clamp of the
jump lead to positive terminal
=
of the donor
vehicle's battery, and then to positive termi-
nal
A
of the jump-starting connection point.
X
Run the donor vehicle's engine at idling
speed.
X
Connect the negative terminal clamp of the
jump lead to negative terminal
;
of the
donor vehicle's battery, and then to earth
contact
?
of your own vehicle.
X
Insert the key into the ignition lock and start
the engine.
You can now switch electrical consumers
back on except the lighting system.
X
Before disconnecting the jump leads, let the
engine run for several minutes.
X Disconnect the negative terminal of the jump
lead from earth contact
?
and then from
negative terminal
;
of the donor vehicle's
battery.
X Disconnect the positive terminal clamp of the
jump lead from positive terminal
A
on the
jump-starting connection point, and then
from positive terminal
=
of the donor vehi-
cle's battery.
Contact protection cover
:
is automatically
returned forwards to its original position by
the spring force and the jump-starting con-
nection point is closed.
X
Position the cover on positive terminal
=
of
the donor vehicle's battery.
You can now switch on the lighting system.
X
Have the battery checked at a qualified spe-
cialist workshop.
350
Jump-starting
Breakdown assistance