Maretron DSM410, Руководство пользователя

Страница: 159 / 289

Revision 1.7.2 Page 143
own J2K100 Gateway. The J1939 Source Address (see section 6.18.4) identifies the transmission on
the J1939 network, the Transmission Instance identifies the transmission to the NMEA2000 network.
Figure 141
– J2K100 NMEA2000 Transmission Instance Configuration
Use the Scroll Up (
) or Scroll Down ( ) keys to change the value to the desired value you wish
to use as the transmission instance identifier, and then press the Enter key ( ) to accept the value
and store it within the J2K100.
6.18.5 AC/Icemaker Instance
This entry allows an air conditioner or icemaker to be mapped to an NMEA2000 instance number.
Each air conditioner or icemaker on an NMEA 2000
®
network must have a unique instance identifier,
to allow display devices to distinguish it from other air conditioners or icemakers on the network. The
“AC/Icemaker:” menu item allows you to configure the air conditioner or instance identifier which will
be sent over the NMEA 2000
®
network along with air conditioner or icemaker-related NMEA 2000
®
messages. In order to configure this parameters, use the Scroll Up ( ) or Scroll Down ( ) keys
to move the highlighted cursor to the “AC/Icemaker:” menu item. Then, press the Enter key (
) to
move the highlight to the numeric value on the right, as shown in Figure 142 below. Because only one
such mapping can take place, each air conditioner or icemaker on the J1939 network must have its
own J2K100 Gateway. The J1939 Source Address (see Section 6.18.4) identifies the air conditioner
or icemaker on the CAN network, the AC/Icemaker Instance identifies the air conditioner or icemaker
to the NMEA2000 network.