Maretron DSM410, Руководство пользователя

Страница: 270 / 289

DSM410
User’s Manual
Page 254 Revision 1.7.2

Send When Triggered
– an “Enable” value in this field will cause a SMS text message to be
sent to the number in the “Phone Number” field whenever the alert is triggered. A “Disable”
value will cause the display to not send a text message to this number in this case.

Send When Cleared
– an “Enable” value in this field will cause a SMS text message to be
sent to the number in the “Phone Number” field whenever the alert is cleared. A “Disable”
value will cause the display to not send a text message to this number in this case.

Phone Number
– use this field to select one of the phone number entries from the phone
book.
8.3.12 Operating Mode Moored
See Section 4.3.4 for a description of Operating Modes. For this Alert to be triggered when the vessel
is in the
Moored state, this option must be set to Enabled.
The options here are

Enable

Disable
The desired option is selected using the
Scroll Up and Scroll Down buttons, and then pressing the
Enter button again.
8.3.13 Operating Mode Underway
See Section 4.3.4 for a description of Operating Modes. For this Alert to be triggered when the vessel
is in the
Underway state, this option must be set to Enabled. The options here are

Enable

Disable
The desired option is selected using the
Scroll Up and Scroll Down buttons, and then pressing the
Enter button again.
8.3.14 Operating Mode Anchored
See Section 4.3.4 for a description of Operating Modes. For this Alert to be triggered when the vessel
is in the
Anchored state, this option must be set to Enabled. The options here are

Enable

Disable
The desired option is selected using the
Scroll Up and Scroll Down buttons, and then pressing the
Enter button again.
8.3.15 Scope
Alerts may be constrained to be displayed only on the DSM410 where they are detected. In this case
the Alert message is not sent out on the NMEA2000 bus, and other devices will not display the alert,
or allow Accepting of Cancelling. The Scope does not affect the generation of Annunciator messages.
The options here are