Maretron DSM410, Руководство пользователя

Страница: 86 / 289

DSM410
User’s Manual
Page 70 Revision 1.7.2
E
nable/Disable…” menu item selected causes the DSM410 to display the following screen (Figure
53).
Figure 53
– DCM100 NMEA 2000
®
PGN Enable/Disable Screen
You can enable or disable the transmission of the these messages, or set the frequency of transmission
of the message by pressing the Enter key (
) on the message to be configured. Options are:

Disable
– The message will not be transmitted

Default
– The message will be transmitted at its default NMEA2000 rate.

1.0s...5.0s
– The message will be transmitted at the period specified.
Select the required option using the
Scroll Up and Scroll Down keys followed by the Enter key.
6.6.1.5 Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.6.2 Current Sensor Zero Offset Calibration
The DCM100 is shipped with a Hall-effect current sensor. In order to match the DCM100 unit and the
sensor to one another and ensure maximum accuracy, you should perform this calibration step while
there is no current flowing through the current sensor. Move the highlight bar to the Current Sensor Zero
Offset Calibration and press the Enter button. The following confirmation screen will be displayed: