Maretron DSM410, Руководство пользователя

Страница: 101 / 289

Revision 1.7.2 Page 85
Figure 71
– Favorite Settings Transfer Completion Screen
6.9.6 Copy DST100 calibrations from local display
DST100 calibration data is not stored in the DST100 device. Rather each DSM150/DSM250/DSM410
needs to apply its own set of calibration parameters to the raw data received. This operation allows
one DSM410 to copy its calibration table to a second DSM150/DSM250/DSM410.
Figure 72
– DSM150/DSM250/DSM410 Copy DST100 calibrations from local display
6.9.7 Copy all settings from local display
This is the single operation that makes it easy to have multiple DSM150/DSM250/DSM410 displays
on a boat. Set one DSM150/DSM250/DSM410 up so that all its settings are correct, and quickly
transfer all the alarms, device settings and display setting to another DSM150/DSM250/DSM410.
Then go in and update the following information to customize the new device.

Display Settings

Advanced Configuration

Installation Descriptions

Display Settings

Label
Also use this function to copy settings from an old DSM150/DSM250/DSM410 to a new
DSM150/DSM250/DSM410 when replacing the device.