Maretron DSM410, Руководство пользователя

Страница: 85 / 289

Revision 1.7.2 Page 69
6.6.1 Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be
performed by an advanced user. Typically advanced configuration is only done at installation and
should not need to be done while at sea.
Figure 52
– DCM100 Advanced Configuration Screen
6.6.1.1 Current Sensor Type
Three different current sensors may be attached to the DCM100. Options are:

200A
– A 200 Amp Current Transducer is connected to the DCM100. This has the part number
LEMHTA200-S.

400A
– A 400 Amp Current Transducer is connected to the DCM100. This has the part number
LEMHTA400-S.

600A
– A 600 Amp Current Transducer is connected to the DCM100. This has the part number
LEMHTA600-S.
Select the required transducer using the
Scroll Up and Scroll Down keys followed by the Enter key.
6.6.1.2 Device Instance
This entry allows you to program the NMEA 2000 device instance for the unit. You usually will not
need to modify the default value of “0” unless you have multiple units on the network.
6.6.1.3 Installation Description
This entry allows you to modify the NMEA 2000 installation description text strings. You can enter
any information you like here, such as the date the unit was installed, or the location in which it was
installed, for later reference. Tools such as Maretron N2KAnalyzer allow you to view these values
later. See section 3.3.4 for details on how to enter a textual value.
6.6.1.4 NMEA2000 PGN Enable/Disable
The DCM100 Annunciator Module transmits the NMEA2000 PGNs #127506 and 127508 which can
be turned on or turned off by the DSM410 display. Pressing the
Enter
key with “NMEA2000 PGN