Maretron DSM410, Руководство пользователя

Страница: 174 / 289

DSM410
User’s Manual
Page 158 Revision 1.7.2
6.21.3 Instance
From here the instance used in the data message may be set.
6.21.4 Channel Configuration
To configure an individual channel, use the Scroll Up and Scroll Down buttons to highlight the
channel, and then press Enter. The following screen will be displayed.
Figure 163
– RIM100 Channel Configuration Screen
6.21.4.1 Mode
Each Channel may be enabled or disabled. Valid Modes are:

Disable
– the channel is not being used

Enable
– the channel is being used
Select the required option using the
Scroll Up and Scroll Down keys followed by the Enter key.
6.21.4.2 Label
A label may be assigned to a channel as an aid to identifying the channel over the network. Typically
this label will describe the equipment to which the channel is connected.
See Section 3.3.4 for details on how to enter a textual value.
6.21.4.3 Reset Counter
This resets the hardware counter associated with this channel to zero.
6.21.4.4 Reset Timer
This resets the hardware timer associated with this channel to zero.