Maretron DSM410, Руководство пользователя

Страница: 266 / 289

DSM410
User’s Manual
Page 250 Revision 1.7.2
Figure 293
– Direction Alert Parameters
8.3.7.11.1 Trigger Configuration
– Direction Alert
Figure 294
– Trigger Configuration – Direction Alert
Re-trigger Period
– When you accept an alert, it will change to the “Accepted” state, and
annunciators that are sounding for that alert will stop sounding. If the condition which caused
the alert remains true after the amount of time in this field, the alert will return to
the “Active”
state, and annunciators will begin sounding again for that alert. If a value of 0:00 is entered,
then the alert will never re-trigger.
Offset Set Point, Offset Set Delay
– If the direction being monitored differs from the reference
direction by more than the Offset Heading Set Point for longer than the time specified in the
Set Delay field, the alert will become active.