Maretron DSM410, Руководство пользователя

Страница: 160 / 289

DSM410
User’s Manual
Page 144 Revision 1.7.2
Figure 142
– J2K100 NMEA2000 AC/Icemaker Instance Configuration
Use the Scroll Up (
) or Scroll Down ( ) keys to change the value to the desired value you wish,
and then press the Enter key ( ) to accept the value and store it within the J2K100.
6.18.6 J1939 Source Address Configuration
A J1939 engine/genset and transmission has its own source address on the J1939 network, which is
different from NMEA 2000
®
addresses. The J2K100 is capable of serving as a gateway between a
single J1939 engine/genset or a single transmission and the NMEA 2000
®
network. This setting
identifies the J1939 source address of the engine/genset and a transmission for which the J2K100
will serve as a gateway.
For air conditioners or icemakers, the “J1939 source address” refers to the source address of the air
conditioner or icemaker on the AC/Icemaker CAN network.
Figure 143
– J2K100 J1939 Source Address Configuration
To set the J1939 source address, use the
Scroll Up and Scroll Down keys to move the highlighted
cursor to the “J1939 Source Address:” menu item. Press the
Enter key to move the cursor over to the
source address value on the right, as shown in Figure 143 above. Then, use the Scroll Up and