Maquet SERVO-air, Руководство пользователя

Страница: 40 / 171

3.1 Workflow summary
• Turn on the ventilator system, prepare the
patient circuit to be used and perform a
pre-use check.
• Select patient category.
• Select invasive or non invasive ventilation.
• Set the ventilation mode.
• Check, and if necessary, adjust the alarm
limits.
• Enter data for the new patient, including
height, weight, and gender (optional).
• Start ventilation and connect the ventilator
system to the patient.
• Adjust alarm limits if necessary.
Stop ventilation when desired.
3.2 Pre-use check
The pre-use check contains a number of tests
that the ventilator system automatically
performs.
Refer to section Pre-use check tests on
page 142.
Each test starts automatically when the
previous test is completed.
To ensure correct system functionality, optimal
performance and patient safety, a pre-use
check must be performed.
WARNINGS!
• Always perform a pre-use check before
connecting the ventilator system to a
patient.
• Do not connect the ventilator system to
a patient while a malfunction persists.
Important:
• When the pre-use check is completed,
all sources of alarm signals and alarm
conditions have been verified and the
alarm system operates correctly.
• The volume of the patient circuit used
during pre-use check should be the same
as during ventilation.
If the patient circuit is changed after the
pre-use check is completed, perform a
new pre-use check or a patient circuit
test.
40
SERVO-air Ventilator System v2.2, User's Manual
| 3 | Operation overview |