Detailed operation by function groups
150
6.2.3.6 Setting the motor base frequency (PAR_13)
A base frequency is the inverter’s output frequency (in Hz) at its rated voltage.
Refer to the motor’s rating plate to set this parameter value. This parameter is
required for V/F and slip compensation control mode operations.
6.2.3.7 Setting the motor synchronization speed (PAR_14)
This parameter is required for speed control mode (Speed(IM) or Speed(PM))
operations. A synchronization speed is the motor speed (in rpm) at the inverter’s
rated voltage.
For a 4-poled 60 Hz induction motor, the synchronization speed is 1800 rpm (=
120 x 60 [frequency] / 4 [pole number]).
For a PM motor, refer to the motor’s rating plate to set this parameter value (in
rpm).
6.2.3.8 Setting the rated motor voltage (PAR_15)
Refer to the motor’s rating plate to set this parameter value.
6.2.3.9 Setting the motor pole number (PAR_16)
Refer to the motor’s rating plate to set this parameter value. The pole number
affects the motor speed (rpm).
6.2.3.10 Setting the motor efficiency (PAR_17)
Refer to the motor’s rating plate to set this parameter value. Use the default
setting if the value is not specified on the motor’s rating plate.
6.2.3.11 Setting the motor rated slip (PAR_18)
For an induction motor, refer to the motor’s rating plate to set this parameter
value. The rated slip value provides information on the deviation between the
Содержание LSLV-L100 Series
