Supplies and accessories
Page 91 of 106
•
Printhead cartridge storage and handling
Once installed, your printhead cartridge should remain in the printer. Removing the printhead
cartridge is not recommended, even while transporting the printer.
If you need to remove the printhead cartridge and store it for any specific reason, protect the
printhead cartridge at all times from contamination by air-borne or surface contaminants such
as dust or fibres.
When handling a printhead cartridge, hold the printhead cartridge only by the handles and do
not touch the ink couplings, the printhead nozzle surface or the electrical contacts.
•
Always store printhead cartridges horizontally, never on end.
•
Do not expose printhead cartridges to freezing (0 ºC – 32 ºF) temperatures.
•
Do not expose printhead cartridges to temperatures higher than 60 ºC (140 ºF).
•
Allow printhead cartridges to acclimatise to ambient temperature before using in your
printer.
•
Replacing the printhead cartridge
Your new printhead cartridge will be delivered packaged as shown in the
Printhead cartridge
section on page 13.
You do not need to switch off your printer to replace the printhead cartridge.
To replace the printhead cartridge in your printer:
1.
Ensure all Print commands have terminated and the printer is switched on and idle and
your ink tanks are installed properly.
DO NOT replace the prithead cartridge when any of the ink tanks have been removed. Always
ensure all the ink tanks are installed before doing so. Failure to do so may compromise ink
delivery in your printer.
2.
Lift the printhead cover.
3.
Press the Menu button, use the Up or Down button to select
Print head
, and then press
the OK/Resume button.
4.
Use the Up or Down button to select
Remove print head
, and then press the OK/Resume
button.
