Printing with your Lomond printer
Page 74 of 106
Excessive Tilt warning
Do not ignore an Excessive Tilt warning!
Prolonged excessive tilt can cause the printhead to deprime, giving rise to print quality problems.
Your Lomond printer must be located on a level surface. Should this not be the case, you will
be notified and the printer will stop printing until the error is cleared. The next time you issue
a Print command, the following messages will appear on both your PC and printer.
Alert window on your PC
Message on your printer’s LCD screen
Tilt error
Action Required:
Your printout will not proceed until the printer is sitting level. Once you have corrected the
tilt of your printer, it will undergo a quick printhead flush and clean, displaying another alert
window as shown here:
Any Print command sent when the printer was not level will be ignored. You will need to re-
issue those Print commands after the printer is level.
