Setting up your Lomond printer
Page 23 of 106
•
Loading US Legal size paper
US Legal paper, at 8½”
×
14” is considerably longer than US Letter or ISO A4, and to
accommodate it Tray 1 incorporates a sliding section which can be extended to increase its
total length.
Figure 3 Tray 1 showing adjustable width and length guides
To load US Legal-sized paper:
1.
Use recommended paper types.
2.
Remove Tray 1 from the printer, ensuring that any packing material has been removed
(see Figure 1).
3.
Move the width and length guides to make space for the paper size you have chosen (see
Figure 3).
4.
Prepare a stack of up to 250 sheets of paper (all of the same size) for insertion into Tray 1
as follows:
•
Flex the sheets back and forth to loosen them, then fan them a few times (do not
crease the paper).
•
Remove any obvious loose paper dust from the surface or edges of the paper.
•
Align the edges of the sheets on a level surface.
5.
Load the paper stack into the Tray 1,
with the recommended print side facing down
.
6.
Ensure the maximum number of sheets in Tray 1 does not reach any higher than the
indicator line (see Figure 2).
7.
Grip the top of the Paper Length guide with thumb and forefinger and squeeze the two
tabs together to unlock it.
8.
Slide the guide until it rests gently against the edge of the paper stack, ensuring that it is
aligned with the Legal mark on the label on the bottom of Tray 1. (Refer to Figure 3 for
tray adjustment.)
9.
Gently push the Paper Width guide in until it pushes the stack against the opposite side of
Tray 1. (Refer to Figure 3 for tray adjustment.)
10.
Re-insert Tray 1 into the printer and push it gently until it comes to a firm stop.
