Printing with your Lomond printer
Page 63 of 106
7.
Follow the instructions shown on the LCD screen:
•
Remove the printed sheets from the output tray.
•
Open the paper tray.
•
Insert the printed pages back on top of any other paper in the paper tray.
•
If you use Tray 1, follow the on-screen instructions below to proceed.
(for Long Edge)
(for Short Edge)
•
If you use Tray 2, follow the on-screen instructions below to proceed.
(for Long Edge)
(for Short Edge)
For best results ensure the printed pages are dry and very flat before re-inserting them into the
paper tray.
8.
Close the paper tray and press the OK/Resume button.
The remaining contents will be printed on the reverse side.
Examine your printout to ensure it matches your needs, otherwise repeat this operation using
the other
Duplex Settings
selection in Step 4.
You may combine duplex printing with other allowable options to achieve just the sort of
printout you require.
•
Booklets
Booklets are generated by folding in half sheets which have been printed on both sides, so
when you choose to print a Booklet, the number of pages per sheet will be fixed to 2 and the
Duplex option will be selected for you automatically.
As a result, the
Multi-Page (N-Up)
option will automatically be set to the value
2
and both it
and the
Duplex
option will be greyed out, so you cannot change them.
