manualshive.com logo in svg

Loma IQ3+, Руководство пользователя

"Получите бесплатно пользовательское руководство для продукта Loma IQ3+ на нашем сайте. С помощью этого руководства вы сможете легко установить и настроить свой продукт. Просто скачайте его с нашего сайта manualshive.com и начните пользоваться всеми его функциями без проблем."

Поделиться
Скачать
background image

Safety First

 

24 

type of extinguishing material is used. Fire on electrical equipment must be extinguished using 
a dry powder extinguisher (Blue label). 

3.

 

AUDIBLE WARNINGS.

 

A conveyor may be fitted with an alarm which operates when a metallic 

contaminant is detected in the product. The maximum volume of the alarm is type dependent 
and lies in the range of 110 dB(A) to 125 dB(A) at 1 metre. 

4.

 

VISUAL INDICATIONS.

 The metal detector may optionally be fitted with indicator lamps, which 

operate to show a particular status or in the event of a fault condition. 

The metal detector must not be operated unless all such indicators are fully operational. There 
are also more detailed fault listings displayed on the operator screen. 

Quality Assurance 

By your selection of a Loma IQ

3

+ metal detector system you have demonstrated your intention to 

assure the quality of your products, and thereby protect your customers. 

The following points are recommended: 

1.

 

Once your Loma metal detector is installed you should contact your local Loma Service 
Department to have it commissioned. 

2.

 

Regularly test the operation of the metal detector to monitor its detection performance. Keep 
accurate records of those tests and any samples being used, along with the product details. 

3.

 

If the metal detector fails a test, quarantine the product from the last test and re-introduce 
through the system once the metal detector is fit for use. 

4.

 

Have the metal detector supported by a Planned Preventative Maintenance Contract. Details 
can be obtained from your local Loma Service Department. 

5.

 

If you have or intend to have BS EN 9000 accreditation, write a section into your Operating 
Procedures Manual covering the operation and maintenance of the metal detector and have it 
regularly calibrated with a certificate issued. 

6.

 

Finally, at least on a yearly basis and when any changes or additions have been made, have 
your operators, QA and maintenance personnel trained in the use of the metal detector. Details 
of available training can be obtained from your local Loma Service Department. Details of 
available training can be obtained from your local Loma Service Department or by sending an 
email to 

[email protected]

. 

ISO9000 

Certificates of Calibration 

This type of calibration is confined to the checking of the electronics of the metal detector against the 
original specification, carrying out any adjustments or repairs as necessary. This is normally carried 
out by the manufacturer against a written specification and using equipment traceable to national and 
international standards. A certificate of calibration would then be issued for the metal detector. Loma 
recommend this calibration should be done at least yearly. 

Product Learn Process 

This process is carried out by the user and involves passing the product through the metal detector 
according to the requirements of the particular calibration system in use. This optimizes the metal 
detector for the best performance. 

Metal Test Wands 

It is recommended that all detector performance checking is conducted using Loma test wands which 
use metal spheres certified and traceable to national and international standards and plastics which 
comply with the EU- Directive 

2011/10/EC

 (Plastic Materials and Articles intended to come into 

contact with food). Loma can supply upon request certificates of conformity for test wands supplied 
either with new equipment or as spare parts. 

Please note that test wands do not require annual calibration. However, the condition of the test 
wands must be inspected regularly for damage or deterioration such as cracks, corrosion, water 

Содержание IQ3+




























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IQ3+

Whistler Group Pro 58 Owner'S Manual preview
Pro 58
Бренд: Whistler Group Страницы: 10
Atest Gaz Teta Gas Manual Book preview
Teta Gas
Бренд: Atest Gaz Страницы: 24
Gold Mountain GMT 1650 cec Operating Manual preview
GMT 1650 cec
Бренд: Gold Mountain Страницы: 12
Xtralis VESDA Sensepoint XCL Frequently Asked Questions Manual preview
Sensepoint XCL
Бренд: Xtralis VESDA Страницы: 7
Garrett ATX Owner'S Manual preview
ATX
Бренд: Garrett Страницы: 23
Garrett CSI 250 Instruction Manual preview
CSI 250
Бренд: Garrett Страницы: 23
Garrett Investigator G-500 Owner'S Manual preview
Investigator G-500
Бренд: Garrett Страницы: 35
Garrett Z-Lynk Wireless System User Manual preview
Z-Lynk Wireless System
Бренд: Garrett Страницы: 24
Garrett Pro-Pointer Owner'S Manual preview
Pro-Pointer
Бренд: Garrett Страницы: 21
Garrett GTI 2500 Owner'S Manual preview
GTI 2500
Бренд: Garrett Страницы: 105
Deteknix XPOINTER Quick Start Manual preview
XPOINTER
Бренд: Deteknix Страницы: 2
BONANZA metal detector User Manual preview
metal detector
Бренд: BONANZA Страницы: 13
DEGA DEGA NBx-EL III LCD Instruction Manual preview
DEGA NBx-EL III LCD
Бренд: DEGA Страницы: 17
Ludlum Measurements 159017 Manual preview
159017
Бренд: Ludlum Measurements Страницы: 19
Ludlum Measurements 086152 Manual preview
086152
Бренд: Ludlum Measurements Страницы: 12
REX RELICSCAN User Manual preview
RELICSCAN
Бренд: REX Страницы: 9
QED Geotech SEM5000 Operating Manual preview
Geotech SEM5000
Бренд: QED Страницы: 36
White’s Electronics 6000/DI PRO SL Instruction Manual preview
6000/DI PRO SL
Бренд: White’s Electronics Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды