Loma IQ3+, Руководство пользователя

Страница: 31 / 251

Safety First
21
Caution: Pneumatic Reject Device
Reject devices operate very quickly to remove contaminated
products from a fast moving production line. Care should be
taken to avoid contact with a reject device when it is
operating
Caution: Pinch Point
Moving parts of machines, specifically conveyors, provide
opportunities for trapping fingers or even items of clothing in
the mechanism if care is not taken.
Caution: Isolate Machine Before Maintenance
Electrical power should be disconnected before carrying out
maintenance operations that expose staff to potentially
lethal voltages.
Caution: Isolate air supply before maintenance
Compressed air should be disconnected before carrying out
maintenance operations where reject devices could be
activated accidentally.
Safety Guards
Under no circumstance must a machine be operated with any guarding removed or interlock
switches defeated.
Guarding
For Loma metal detectors the use of guarding, including covers, panels, curtains and other methods
is extremely important in order to restrict operators from accessing areas of the machine that are
potentially hazardous whilst the machine is operating or to prevent exposure to potentially hazardous
ionising and non-ionising radiation.
Interlock switches
On some machines, access hatches are incorporated into the guards to provide access to some
areas of the machine to, for example, clear obstructions and remove products when required. These
hatches are fitted with an interlock switch so that when a hatch is opened, the machine will switch off
and a fault condition is generated.
Safety Relay and Circuits
As safety is paramount, at least one fail safe relay is fitted to ensure that if a contact of the interlocks
were to fail the safety relay will automatically detect the fault and therefore switch off the metal
detector and generate a fault condition.
Responsibilities and Disclaimer
Unless agreed otherwise in writing by Loma Systems, any warranty claims are subject to the
following:
■
No unapproved changes or additions to the electrical wiring system have been carried out.
■
No unapproved mechanical changes or additions to the system have been carried out.
■
No unapproved electronic changes or additions to the system have been carried out.
■
No unapproved changes or additions to the system software have been carried out.
■
Cleaning of the metal detector has been carried out in accordance with the Cleaning guidance
included in this User Guide.