Loma IQ3+ Скачать руководство пользователя | Manualshive

Страница: 65 / 251

background image

About the Metal Detector Range

55

Reject Devices

Reject Devices

Loma Systems offer a range of reject devices for removing contaminated products from your
production line, based on a number of factors including the product type, its general dimensions, the
general set up of your production line and of course how you wish to handle contaminated products.

The following reject devices are available and may be fitted to your machine:

■

Stop On Detect (SOD)

The Stop-On-Detect reject device causes the conveyor to stop moving and an alarm to sound,
indicating that a contaminant has been detected

.

■

Air Blast

The air blast reject device uses a high pressure blast of compressed air to push a contaminated
product off the belt into the reject bin.

■

Pusher

The pusher reject device pushes the contaminated product off the belt into the reject bin.

■

Plough

The plough reject device swings across the belt to divert the contaminated product off the belt
into the reject bin.

■

Retracting Band

The retracting band reject device uses compressed air to activate a carriage retracting
mechanism to create a gap in the conveyor belt. The contaminated product then falls through
the gap and into a reject bin, which is mounted on the underside of the conveyor.

■

Powered Decliner

The powered decliner reject device uses compressed air to activate a carriage declining
mechanism which guides the contaminated product into a reject bin mounted on the underside
of the conveyor. The carriage then returns to its original position,

■

Signal Only

Alternatively, a conveyor can be supplied without a reject device but with ‘Signal Only’ output.

On detection of metallic contaminant in the product, the control unit provides an output signal
only. This conveyor can be used in conjunction with the customer’s choice of equipment.

As standard, a reject cover is fitted over the outfeed part of the belt and the reject device. This
protective device is intended to stop any part of a person’s body from being placed within the
operating area of the reject device. The Stop-On-Detect reject is not fitted with a reject cover.

Stop On Detect

Stop On Detect is the simplest type of reject device available which is most suitable for removing
heavy, awkward shaped and continuous strip contaminated products from your production line.

When a contaminated product is detected the conveyor belt will stop and an alarm will sound,
allowing you to remove the product from the conveyor belt and dispose of it in accordance with your
local procedures.

After removal of the contaminated product, you must then manually restart the conveyor.

Stop On Detect reject device are suitable for use with systems where a maximum of 60 packs are
being presented for inspection per minute and the maximum individual pack weight is 60Kg.

«
...
63
64
65
66
67
...
»

Содержание IQ3+




























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IQ3+

Бренд: Gas Clip Technologies Страницы: 2

AquiTron AT-MGS-402

Бренд: aquilar Страницы: 30

Бренд: Abus Страницы: 47

Бренд: ELRO Страницы: 3

Бренд: Riken Keiki Страницы: 68

OLDHAM 300 Series

Бренд: Industrial Scientific Страницы: 49

Бренд: Wise Страницы: 18

Бренд: Sensotran Страницы: 11

Бренд: IBRID Страницы: 2

Бренд: YEEZOU Страницы: 3

Бренд: RKI Instruments Страницы: 19

853 CO2 Suppressor

Бренд: Metrohm Страницы: 29

MAGNASCANNER CS 5000

Бренд: Garrett Страницы: 48

Бренд: First Texas Products Страницы: 12

Бренд: Armand Страницы: 9

Бренд: Dräger Страницы: 420

Бренд: Novus Страницы: 20

Laser ShifterPro

Бренд: Cincinnati Microwave Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды