LG SV-iC5 Series, Инструкция по эксплуатации

Страница: 41 / 141

6. Basic operation
6-3
SV-iC5
Frequency setting via potentiometer & operating via the Run key
1 -. Apply AC input power to the inverter.
2 -. When 0.0 is displayed, press the Up (
S
) key three times.
3
-. drv is displayed. Operating method is selectable.
-. Press the Prog/Ent (
z
) key.
4
-. Check the present operating method (“1” is run via control terminal)
-. Press the Prog/Ent (
z
) key and then Down (
T
) key once.
5 -. After setting “0”, press the Prog/Ent (
z
) key.
6
-. “drv” is displayed after “0” is blinking. Operation method is set via the Run key on the keypad.
-. Press the Up (
S
) key once.
7
-. Different frequency setting method is selectable in this code.
-. Press the Prog/Ent (
z
) key.
8
-. Check the present frequency setting method (“ 0 ” is run via keypad).
-. Press the Up (
S
) key twice.
9 -. After checking “ 2 ” (frequency setting via potentiometer), press the Prog/Ent (
z
) key.
10
-. “ Frq ” is displayed after “2” is blinking. Frequency setting is set via the potentiometer on the
keypad.
-. Turn the potentiometer to set to 10.0 Hz in either Max or Min direction.
11
-. Press the Run key on the keypad.
-. FWD lamp begins to blink and accelerating frequency is displayed on the LED.
-. When run frequency 10Hz is reached, 10.0 is displayed as shown left.
-. Press the STOP/RST key.
12
-. FWD lamp begins to blink and decelerating frequency is displayed on the LED.
-. When run frequency is reached to 0Hz, FWD lamp is turned off and 10.0 is displayed as shown
left.
220VAC
L1(R)
L2(S)
P
P1
N
G
U
V
W
Motor
MIN MAX
RUN STOP/RST
Freq.
Run key
10 Hz
STOP/RST key
Wiring Operating pattern