LG SV-iC5 Series, Инструкция по эксплуатации

Страница: 31 / 141

5. Programming keypad
5-7
SV-iC5
5.5 Parameter setting method
Changing parameter value in Drive group
When changing ACC time from 5.0 sec to 16.0
Drive group
1 -. In the first code “0.0”, press the Up (
S
) key once to go to the second code.
2
-. ACC [Accel time] is displayed.
-. Press the Prog/Ent key (
z
) once.
3
-. Preset value is 5. 0 , and the cursor is in the digit 0 .
-. Press the Left (
W
) key once to move the cursor to the left.
4 -. The digit 5 in 5 .0 is active. Then press the Up (
S
) key once.
5
-. The value is increased to 6 .0
-. Press the Left (
W
) key to move the cursor to the left.
6
-. 0 .60 is displayed. The first 0 in 0 .60 is active.
-. Press the Up (
S
) key once.
7
-. 1 6.0 is set.
-. Press the Prog/Ent (
z
) key once.
-. 1 6.0 is blinking.
-. Press the Prog/Ent (
z
) key once again to return to the parameter name.
8 -. ACC is displayed. Accel time is changed from 5.0 to 16.0 sec.
♣
In step 7, pressing the Left (
W
) or Right (
X
) key while 16.0 is blinking will disable the setting.
Note) Pressing the Left (
W
)/ Right (
X
) /Up (
S
) /Down (
T
) key while cursor is blinking will cancel the parameter value
change.