Lenovo NeXtScale nx360 M4 Скачать руководство пользователя страница 376

Страница: 376 / 738

Automatically notify support

Yes

Alert Category

Warning - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0144

User Response

1. Check the IBM support website for an applicable retain tip or firmware update that applies

to this memory error.

2. Swap the affected DIMMs (as indicated by the error LEDs on the system board or the event

logs) to a different memory channel or microprocessor.

3. If the error still occurs on the same DIMM, replace the affected DIMM.

4. (Trained technician only) If the problem occurs on the same DIMM connector, check the DIMM

connector. If the connector contains any foreign material or is damaged, replace the system
board.

5. (Trained technician only) Remove the affected microprocessor and check the microprocessor

socket pins for any damaged pins. If a damage is found, replace the system board.

6. (Trained technician only) Replace the affected microprocessor.

•

806f050d-0401ffff : Array [ComputerSystemElementName] is in critical condition. (Computer HDD0)

This message is for the use case when an implementation has detected that an Array is Critical.

May also be shown as 806f050d0401ffff or 0x806f050d0401ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Hard Disk drive

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0174

User Response

1. Make sure that the RAID adapter firmware and hard disk drive firmware are at the latest level.

2. Make sure that the SAS cable is connected correctly.

362

IBM NeXtScale nx360 M4 Installation and Service Guide

Содержание NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NeXtScale nx360 M4

Отзывы:

Похожие инструкции для NeXtScale nx360 M4

Бренды по названию

Популярные бренды

Lenovo NeXtScale nx360 M4, Инструкция по установке и обслуживанию

Результаты поиска

Содержание NeXtScale nx360 M4

Отзывы:

Похожие инструкции для NeXtScale nx360 M4

Бренды по названию

Популярные бренды