Lenovo NeXtScale nx360 M4, Инструкция по установке и обслуживанию

Страница: 194 / 738

Provides the prefix of the message ID and the sequence number that is used by the CIM message
registry.
SNMP Trap ID
The SNMP trap ID that is found in the SNMP alert management information base (MIB).
Automatically contact Service
If this field is set to Yes , and you have enabled Electronic Service Agent (ESA), IBM Support will be
notified automatically if the event is generated.
While you wait for IBM Support to call, you can perform the recommended actions for the event.
User response
Indicates what actions you should perform to solve the event.
Perform the steps listed in this section in the order shown until the problem is solved. After you perform
all of the actions that are described in this field, if you cannot solve the problem, contact IBM Support.
Note: This list includes error codes and messages that might not apply to this machine type and model.
The following is the list of Integrated Management Module II (IMM2) error messages and
suggested actions to correct the detected server problems. For more information about Integrated
Management Module II (IMM2), see the
Integrated Management Module II User's Guide at
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5086346.
List of IMM events
This section lists all messages that can be sent from the IMM.
• 40000001-00000000 : Management Controller [arg1] Network Initialization Complete.
This message is for the use case where a Management Controller network has completed initialization.
May also be shown as 4000000100000000 or 0x4000000100000000
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - IMM Network event
SNMP Trap ID
37
CIM Information
Prefix: IMM ID: 0001
User Response
Information only; no action is required.
180
IBM NeXtScale nx360 M4 Installation and Service Guide