Lenovo BladeCenter HS23 1929, Руководство по диагностике и обслуживанию

Страница: 126 / 299

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 3 “ Parts listing ” on page 29 to determine which components are consumable, structural, or CRU
parts.
• If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
Error Code Event ID
Type
Error Message
Action
battery” on page 41
and “Installing the
battery” on page 42).
9. Make sure that the
heat sink is properly
attached to the
microprocessor (see
“Installing a
microprocessor and
heat sink” on page
65).
0x80010700 80010701-2101ffff Warning System mgmt
software (PCH
Temp)
temperature over
warning threshold.
Reading: X;
Threshold: Y
1. Make sure that the
room temperature is
within the operating
specifications (see
“Features and
specifications” on
page 2).
2. Make sure that none
of the air vents on the
BladeCenter unit and
on the blade server
are blocked.
3. Make sure that all of
the fans on the
BladeCenter unit are
running.
4. Check the error logs
about the
temperature and the
fan (see “POST/UEFI
diagnostic codes” on
page 81).
0x80010900
80010901-2101ffff Error System mgmt
software (PCH
Temp)
temperature over
critical threshold.
Reading: X,
Threshold: Y
1. Make sure that the
room temperature is
within the operating
specifications (see
“Features and
specifications” on
page 2).
2. Make sure that none
of the air vents on the
BladeCenter unit and
on the blade server
are blocked.
3. Make sure that all of
the fans on the
110
BladeCenter HS23 Blade ServerProblem Determination and Service Guide