Lenovo BladeCenter HS23 1929, Руководство по диагностике и обслуживанию, Страница: 173 / 299

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 3 “ Parts listing ” on page 29 to determine which components are consumable, structural, or CRU
parts.
• If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
Error Code Event ID
Type
Error Message
Action
“Removing the
system-board
assembly” on page
71 and “Installing the
system-board
assembly” on page
71).
6. (Trained technician
only) Remove the
affected
microprocessor and
check the
microprocessor
socket pins for any
damaged pins. If a
damage is found,
replace the system-
board assembly (see
“Removing the
system-board
assembly” on page
71 and “Installing the
system-board
assembly” on page
71).
7. (Trained technician
only) Replace the
affected
microprocessor (see
“Removing a
microprocessor and
heat sink” on page 61
and “Installing a
microprocessor and
heat sink” on page
65).
0x806f0313 806f0313-1701ffff Error Chassis (NMI
State) software
NMI
1. Verify that you have
the latest system
firmware (see
“Updating firmware
and device drivers”
on page 23).
2. If an expansion card
is installed in the
blade server, verify
that the firmware for
each expansion card
is up to date.
Chapter 5
.
Diagnostics
157