Lenovo BladeCenter HS23 1929 Скачать руководство пользователя страница 83

Страница: 83 / 299

a. Note which release lever is labeled as the first release lever to open and open it.

b. Open the second release lever on the microprocessor socket.

c. Open the microprocessor retainer.

Step 4. Install the microprocessor in the microprocessor socket:

a. If a dust cover is installed over the microprocessor socket, lift the dust cover from the socket.

Store the dust cover in a safe place.

b. Touch the static-protective bag that contains the new microprocessor to any

unpainted

surface on the BladeCenter chassis or any

unpainted

metal surface on any other grounded

rack component; then, carefully remove the microprocessor and the installation tool from the
package.

c. Release the sides of the cover and remove the cover from the installation tool. The

microprocessor is preinstalled on the installation tool.

Note:

Do not touch the microprocessor contacts. Contaminants on the microprocessor

contacts, such as oil from your skin, can cause connection failures between the contacts and
the socket.

d. Align the installation tool with the microprocessor socket. The installation tool rests flush on

the socket only if properly aligned.

Installation tool

Alignment
pins

Microprocessor

e. Install the microprocessor using the following instructions for your installation tool.

Chapter 4

Removing and replacing blade server components

Содержание BladeCenter HS23 1929












































































































































































































































































































Результаты поиска

Содержание BladeCenter HS23 1929

Отзывы:

Lenovo BladeCenter HS23 1929, Руководство по диагностике и обслуживанию, Страница: 83 / 299

Результаты поиска

Содержание BladeCenter HS23 1929

Отзывы: