LANDTEC BG3K2, Руководство по эксплуатации, Страница: 98 / 181

98 Operating Manual
General Operating Instructions
OMBG3000 – Iss.01 © Copyright 2016
Screen 15 - Configure Analogue Outputs
2) Press the right soft key to ‘Exit’ without saving any changes.

Note: If the user has accessed the ‘Configure Analogue Outputs’ screen
via the ‘Stop Sampling’ screen, the user will be returned to the ‘Stop
Sampling’ screen.
3) To ‘Edit’ a parameter, press the middle soft key to enter edit mode. Using
the scroll keys, select a parameter to edit (highlighted in the table) and
select the field with the

key.
4) Use the scroll keys to select the chosen parameter and select using the

key, or use the keypad to enter the gas concentration for the safe value
followed by the

key to confirm.
5) Once a parameter has been changed, the left soft key becomes available
to ‘Save and Exit’. Once pressed, the user will be returned to the
‘Configure Interface’ menu.
Configure Modbus Slave
This option allows the user to configure the Modbus digital output of the
BIOGAS 3000. The user can change the following parameters:

Slave Address – this is the address of the BIOGAS 3000 on the bus

Baud Rate – Information is transferred in a communication channel at
this rate. Modbus is typically 9600 or 19200