LANDTEC BG3K2 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 181

LANDTEC BG3K2 Скачать руководство пользователя страница 46

46

Operating Manual

OMBG3000 – Iss.01

© Copyright 2016

possible so that it can be easily reached and clearly identified as the
disconnecting device for the system.

The mains cable must be three core cable (live, neutral and earth) and enter
the enclosure via a cable gland (see

Cable Gland Selection and Cord

) through the mains supply customer cable entry point (see

annotation 1 on

Figure 3 - BIOGAS 3000 customer connections

How to Wire the Mains Supply

4.9.2

Warning

Only a qualified person should make electrical
connections to the system.

Ensure the power is isolated and the

Protective Cover

is

removed before wiring to the system.

Failure to connect a suitable earth to the system could
result in serious injury.

The equipment must be provided with a double-pole
switched and fused mains supply. The switch must be
mounted as close to the equipment as practicably
possible and clearly identified as the disconnecting
device for the system.

Cable glands should meet the requirements of

Gland Selection and Cord Anchorage

Cable insulation and conductor sizes must meet the
requirements of

Cable Conductor Sizes and Insulation

If using armored cable, the armor must not be used as
the main earth connection for the BIOGAS 3000. If
earthing of the armor is required, this must not be taken
from the BIOGAS 3000.

All cables should be crimped with an appropriate
insulated ferrule for the size of the cable being used. In
addition, the cable insulation must be housed
adequately within the protective sheath of the ferrule.

«
...
44
45
46
47
48
...
»

Содержание BG3K2






















































































































































































Отзывы:

Нет отзывов