LANDTEC BG3K2 Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 181

LANDTEC BG3K2 Скачать руководство пользователя страница 102

102

Operating Manual

General Operating Instructions

OMBG3000 – Iss.01

© Copyright 2016



Note: If the system was fitted with the auto-drain option at point of
manufacture, this option will not be available in the ‘Configure Relays’
screen.

6)

Once a parameter has been changed, the left soft key becomes available
to ‘Save and Exit’. Once pressed, the user will be returned to the
‘Configure Interface’ menu.

5.7.1.4

Adjust Backlight

This option allows the operator to set the brightness of the backlight and the
timer for when it will auto dim. In addition, the backlight can also be controlled
using the ‘backlight’ key at any time. Having a brighter backlight will improve
the readability of the display in bright sunlight.

1)

From the ‘Settings’ menu press key ‘4’ to select the ‘Adjust Backlight’
option.

Screen 18 - Adjust Backlight

2)

Press the right soft key to ‘Exit’ without saving any changes.

3)

Press key ‘6’ to increase the brightness of the display or use key ‘4’ to
reduce the brightness.

4)

Press key ‘1’ to set whether the backlight auto-dims after a timeout or is
always on and controlled manually by the ‘Backlight’ key.

«
...
100
101
102
103
104
...
»

Содержание BG3K2






















































































































































































Отзывы:

Нет отзывов