LANDTEC BG3K2 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 181

LANDTEC BG3K2 Скачать руководство пользователя страница 107

Operating Manual

General Operating Instructions

107

© Copyright 2016

OMBG3000 – Rev1

Screen 22 - Daily Air Purge settings

2)

Press the right soft key to ‘Exit’ without saving any changes.

3)

Press key ‘1’ to edit the start time, key ‘2’ to edit the air purge duration, or
key ‘3’ to edit the wait time.



Note: The ‘Wait Time’ is the time the system waits before updating the
outputs when sampling is recommenced after a daily air purge, gas check,
calibration, or stopping the sampling process. It is important that a
suitable time be entered to ensure the system readings have stabilized to
avoid false alarms.



All parameters have minimum and maximum values that can be entered.
If a time is outside of this range, the user will be prompted to enter a
more suitable time.

4)

Key in a suitable time for the system and store using the



key.

5)

Once a parameter has been changed, the left soft key becomes available
to ‘Save and Exit’. Once pressed, the user will be returned to the ‘Settings’
menu.

«
...
105
106
107
108
109
...
»

Содержание BG3K2






















































































































































































Отзывы:

Нет отзывов