manualshive.com logo in svg

Kyocera TASKalfa 2551ci, Руководство по обслуживанию

Kyocera TASKalfa 2551ci - многофункциональное устройство для офиса. На нашем сайте вы можете скачать бесплатно руководство пользователя и быстро установить принтер. Уникальный функционал и высокое качество печати делают его идеальным выбором для вашего бизнеса. Скачайте руководство на manualshive.com.

Поделиться
Скачать
background image

17

[Automatic adjustment using the original for adjustment]
If there is no DP auto adjustment origina

1.

Set the maintenance mode U411, select [DP Auto Adj] and press the 
Start key to print an original.

2.

Set the printed original on the contact glass and press the Start key.

3.

Set the original on the DP face up and press the Start key to carry out 
surface adjustment.

4.

If OK appears on the display, the adjustment is completed.
If ERROR XX appears, the adjustment failed. Check the original set 
position and repeat steps 2 and 3 until OK appears.
For details, see the service manual.

[Réglage automatique en utilisant l’original pour effectuer le réglage]
Si la machine n'est pas pourvue de la fonction réglage automatique d'origi-
nal du DP

1.

Régler le mode maintenance U411, sélectionner [DP Auto Adj] et 
appuyer sur la touche Start pour imprimer un original.

2.

Placer l'original qui vient d'être imprimé sur la vitre d'exposition et 
appuyer sur la touche Start.

3.

 Placer l'original sur le DP côté imprimé en haut et appuyer sur la tou-
che Start pour procéder au réglage de la surface.

4.

Si le message OK apparaît sur l'affichage, le réglage est terminé.Si le 
message ERROR XX (erreur XX) s'affiche, le réglage a échoué. Vérifi-
fer la position de l'original et recommencer les opérations 2 et 3 jusqu'à 
ce que le message OK apparaisse. 

 

Pour plus de details, se reporter au manuel d’entretien.

[Ajuste automático utilizando el original para el ajuste]
Si no existe el original de ajuste automático del DP

1.

Entre al modo de mantenimiento U441, seleccione [DP Auto Adj] y 
pulse la tecla de Start para imprimir un original.

2.

Coloque el original impreso sobre el cristal de contacto y pulse la tecla 
de Start.

3.

Coloque el original en el DP cara arriba y pulse la tecla de Start para 
realizar un ajuste de anverso.

4.

Si aparece OK en la pantalla significa que el ajuste ha sido realizado. 
Si aparece ERROR XX, el ajuste ha fallado. Compruebe la posición 
ajustada del original y repita los pasos 2 y 3 hasta que aparezca OK en 
la pantalla. 
Para mas detalles, lea el manual de servicio.

[Automatische Einstellung mithilfe des Originals]
Falls keine automatische Einstellung des Originals des DP vorhan-
den ist

1.

Den Wartungsmodus U411 einschalten. [DP Auto Adj] wählen und die 
Start-Taste betätigen, um ein Original auszudrucken.

2.

Das ausgedruckte Original auf das Kontaktglas legen und die Start-
Taste betätigen.

3.

Das Original mit der Druckseite nach oben einlegen und die Start-Taste 
betätigen, um die Oberflächeneinstellung ausführen zu lassen.

4.

  

Wenn am Display OK angezeigt wird, ist die Einstellung abgeschlos-

sen. Wenn ERROR XX (FEHLER XX) angezeigt wird, ist die Einstel-
lung fehlgeschlagen. Überprüfen Sie die Originalpositionierung und 
wiederholen Sie Schritte 2 und 3, bis OK angezeigt wird.
Weitere Einzelheiten siehe Wartungsanleitung.

[Regolazione automatica eseguita con l’originale]
Se non è presente l'autoregolazione originale DP

1.

Impostare la modalità manutenzione U411, selezionare [DP Auto Adj] e 
premere il tasto di Start per stampare un originale.

2.

Posizionare l'originale stampato sul vetro di appoggio e premere il 
tasto di Start.

3.

Posizionare l'originale sul DP rivolto verso l'alto e premere il tasto di 
Start per eseguire la regolazione della superficie.

4.

Se OK appare sul display, la regolazione è completata.Se compare 
ERROR XX (ERRORE XX), la regolazione non è riuscita. Verificare la 
posizione di impostazione dell'originale e ripetere le operazioni 2 e 3 
fino a quando appare OK.
Per ulteriori dettagli leggere il manuale d’istruzioni.

[ 調整用原稿による自動調整 ]
DP 調整用原稿が無い場合

1.

メンテナンスモード U411 をセットし、

[DP Auto Adj]、Start キーを押

し原稿を出力する。

2.

出力した原稿をコンタクトガラス上にセットし、Start キーを押す。

3.

原稿を FaceUp で DP へセットし、Start キーを押し、表面の調整を行
う。

4.

ディスプレイに OK が表示されれば調整完了となる。
ERROR XX が表示された場合は調整失敗である。原稿のセット位置を確
認し、OK が表示されるまで手順 2 ～ 3 を繰り返す。
詳細はサービスマニュアルを参照のこと。

[ 通过调整用原稿进行自动调整 ]
没有 DP 调整用原稿时

1.

设置维护模式 U411，按 [DP Auto Adj]、Start 键以输出原稿。

2.

将输出的原稿放在稿台上，按 Start 键。

3.

将原稿面朝上放在 DP 主机上，按 Start 键以进行正面的调整。

4.

如果屏幕上出现 OK（完成），则表示调整完成。
如果出现 ERROR XX（错误 XX），则表示调整失败。检查原稿设定位置并
重复步骤 2 和 3，直到 OK（完成）出现。
详细内容请参照维修手册。

[ 조정용 원고를 이용한 자동조정 ]
DP 조정용 원고가 없는 경우

1.

메인터넌스 모드 U411 을 세트하고 [DP Auto Adj], 시작키를 눌러 원고를 
출력합니다 .

2.

출력한 원고를 원고 유리에 장착하고 시작키를 누릅니다 .

3.

원고를 FaceUp 으로 DP 본체로 세트하고 시작키를 눌러 표면조정을 합니
다 .

4.

디스플레이에 OK 가 표시되면 조정완료가 됩니다 .
ERROR XX 가 표시된 경우에는 조정실패입니다 . 원고 장착위치를 확
인하고 OK 가 표시될 때까지 순서 2 ～ 3 를 반복합니다 .
상세는 서비스 매뉴얼을 참조

Содержание TASKalfa 2551ci





















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TASKalfa 2551ci

Datamax M-Class Mark II Maintenance Manual preview
M-Class Mark II
Бренд: Datamax Страницы: 94
Oki C9850hdn Safety Manual preview
C9850hdn
Бренд: Oki Страницы: 48
Oki C3520 Network Manual preview
C3520
Бренд: Oki Страницы: 34
Oki C3200n Reference preview
C3200n
Бренд: Oki Страницы: 65
Oki C6100dn Safety Information Manual preview
C6100dn
Бренд: Oki Страницы: 44
Oki C6100dn Setup Manual preview
C6100dn
Бренд: Oki Страницы: 36
OHAUS SF40A User Manual preview
SF40A
Бренд: OHAUS Страницы: 28
Oce cm2520 User Manual preview
cm2520
Бренд: Oce Страницы: 396
Oce cm2510 Safety Manual preview
cm2510
Бренд: Oce Страницы: 28
Oki CX 1145 MFP Safety & Warranty Manual preview
CX 1145 MFP
Бренд: Oki Страницы: 64
Wasp WPL305 Quick Start Manual preview
WPL305
Бренд: Wasp Страницы: 2
Xerox ColorQube 8580 System Administrator Manual preview
ColorQube 8580
Бренд: Xerox Страницы: 93
Xerox C235 Safety, Regulatory, Recycling, And Disposal Reference Manual preview
C235
Бренд: Xerox Страницы: 36
Xerox Copycentre C118 Evaluator Manual preview
Copycentre C118
Бренд: Xerox Страницы: 12
Xerox 4890 Advanced Product Reference preview
4890 Advanced
Бренд: Xerox Страницы: 136
Xerox 4250 - WorkCentre - Copier Secure Installation And Operation preview
4250 - WorkCentre - Copier
Бренд: Xerox Страницы: 4
Xerox 4250 - WorkCentre - Copier Brochure & Specs preview
4250 - WorkCentre - Copier
Бренд: Xerox Страницы: 4
Xerox ColorQube 9201 Quick Manual preview
ColorQube 9201
Бренд: Xerox Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды