Kyocera ECOSYS P4040dn, Руководство по эксплуатации

Страница: 295 / 318

A-21
Appendix
Special Paper
The following types of special paper can be used:
Use paper that is sold specifically for use with copiers or printers (heat-fusing type). When using labels, thin paper,
postcards, or thick paper, feed the paper from the
MP tray . For details, refer to MP Tray Set. (MP tray settings) on page 4-30 .
Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to
give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper
causes harm to the machine or operator.
Transparency
To prevent printing problems, feed transparencies into the printer one
sheet at a time from the
MP tray . Always load the transparencies
horizontally.
If the transparencies have rough edges on the back, it may cause a paper
jam. Remove the rough edges, reverse the sides, feed the sheet from the
opposite edge, or flip the sheet over.
When unloading transparencies (e.g., for clearing jams), hold them
carefully by the edges to avoid leaving fingerprints on them.
Paper Type to be Used Paper Type to be Selected
Overhead projector transparencies
Transparency
Rough paper
Rough
Thin paper
Vellum
Label
Labels
Recycled paper
Recycled
Preprinted paper
Preprinted
Bond paper
Bond
Postcards
Cardstock
Colored paper
Color
Prepunched paper
Prepunched
Letterhead
Letterhead
Envelopes
Envelope
Thick paper
Thick
High-quality paper
High Quality
Custom
Custom 1~8
Note
Before purchasing any type of special paper, test a sample on the machine and check that printing quality is
satisfactory.