Kyocera ECOSYS P4040dn, Руководство по эксплуатации

Страница: 129 / 318

4-63
Operation Panel
Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
Use the procedure below.
1
In the TCP/IP Settings menu, press
U
or
V
to select Protocol
Detail
.
2
Press [OK] . The
Protocol Detail
menu screen appears.
3
Press U or V to select the item for which you want to make settings.
4
Press [OK] . This displays the setting screen for the item selected in
step 3.
The screen shown is the one when
NetBEUI
is selected.
5
Press U or V to select
On
or
Off
.
6
Press [OK] . The
Protocol Detail
menu reappears.
Item Description Default Setting
Restarting the System
†
†
z : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
NetBEUI Selects whether or not to receive
documents using NetBEUI.
On
×
SNMPv3 Set SNMPv3.
Off
z
FTP (Server) Select whether or not to receive
documents using FTP.
On
z
SNMP Select whether or not to
communicate using SNMP.
On
z
SMTP (E-mail TX) Select whether or not to send e-
mail using SMTP.
Off
×
POP3 (E-mail RX) Select whether or not to receive e-
mail using POP3.
Off
×
RAW Port Select whether or not to
communicate using RAW Port.
On
z
LPD Select whether or not to receive
documents using LPD as the
network protocol.
On
z
HTTP Select whether or not to
communicate using HTTP.
On
z
LDAP Select whether or not to use LDAP.
Off
×
Protocol Detail:
FTP(Server)
Exit
03
SNMPv3 02
01 NetBEUI
NetBEUI:
Off 01
On 02 *