Kyocera ECOSYS P4040dn, Руководство по эксплуатации

Страница: 108 / 318

Operation Panel
4-42
Auto Cass. Change (Auto Cassette Change setting)
You can select the following actions when the paper runs out in the paper source while printing.
1
In the
Print Settings
menu, press U or V to select
Auto
Cass.Change
.
2
Press [OK] . The
Auto Cass.Change
screen appears showing the
auto cassette change settings.
3
Press U or V to select
Off
or
On
.
4
Press [OK] . The auto cassette change is set and the
Print
Settings
menu reappears.
MP Tray Priority (the settings for priority paper feed from the MP tray)
If paper is set in the MP Tray then it is possible for priority to be given to that MP tray in the paper feed.
1
In the
Print Settings
menu, press
U
or
V
to select
MP Tray
Priority
.
2
Press [OK] . The
MP Tray Priority
screen appears showing the
available MP tray priority mode options.
Off
(The printer driver settings are followed.)
Auto Feed
(If Auto is selected in the printer driver and there is paper
in the MP tray then the paper feed will be from the MP tray.)
Always
(If there is paper in the MP tray then the paper feed will be
from the MP tray regardless of what is set in the printer driver.)
3
Press
U
or
V
to select the desired MP tray priority mode.
4
Press [OK] . The MP tray priority mode is set and the
Print
Settings
menu reappears.
Off The printer displays
Load paper cassette #.
(# is a cassette number) or
Load paper in MP
Tray
, and stops printing.
Load the paper according to the paper source displayed to resume printing.
To print from the other cassette, press
[Alt.]
( [Left Select] ). Press U or V to select the desired
paper source, and then press [OK] .
On The printer continues printing automatically when the other cassette contains the same paper as the
currently used paper cassette.
Auto Cass.Change:
Off
01
On
02
*
Note
You can also configure the Auto Cassette Change in
the Command Center RX. Access to the Command Center
RX, and then go to
Basic > Defaults > Device Defaults
page. For more information on access to the Command
Center RX, refer to the
Command Center RX User Guide .
MP Tray Priority:
Off 01
Auto Feed 02
*
Always 03