Kyocera ECOSYS P4040dn, Руководство по эксплуатации

Страница: 179 / 318

4-113
Operation Panel
Server Type (Server type selection)
Select the type of server for the authentication server.
1
In the
Netwk Auth. Set
menu, press
U
or
V
to select
Server
Type
.
2
Press [OK] . The
Server Type
screen appears.
The available server types are as follows:
NTLM
Kerberos
Ext.
3
Press U or V to select the desired server type.
4
Press [OK] . The server type is set and the
Netwk Auth. Set
menu
reappears.
Host Name (Entering of Host Name)
Enter the host name for the authentication server.
1
In the
Netwk Auth. Set
menu, press U or V to select
Host Name
.
2
Press [OK] . The
Host Name
screen appears.
3
Enter the host name using the numeric keys.
4
Press [OK] . The
Domain
screen appears.
5
Referring to Domain Name (Selecting of Domain Name) on page 4-
114 , select the domain name for the authentication server.
6
Press [OK] . The host name is registered and the
Netwk Auth. Set
menu reappears.
Port (Port number setting)
Set the Port number for the authentication server.
1
In the
Netwk Auth. Set
menu, press
U
or
V
to select
Port
.
2
Press [OK] . The
Port
screen appears.
Server Type:
NTLM
01
Kerberos
02
*
Ext.
03
Note Select
Ext.
to perform ID Card Authentication.
Host Name:
Text
ABC
Note Up to 64 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2 .
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Domain:
----------------
Menu
03
Domain 02 02
01 Domain 01 *
Note
This setting is only displayed when
Ext
. has been set as the Server Type (Server type selection) on page 4-
113 .
Port:
9093