Kyocera ECOSYS P4040dn, Руководство по эксплуатации

Страница: 155 / 318

4-89
Operation Panel
Sleep Level Set. (Sleep level setting)
For Europe
This sets whether or not the machine enters sleep mode for each function.
1
In the
Timer Setting
menu, press U or V to select
Sleep Level
Set. .
2
Press [OK] . The
Sleep Level Set.
menu screen appears.
3
Press U or V to select
Status
.
4
Press [OK] . The
Status
menu screen appears.
Next set whether or not to use Energy Saver mode for each function.
5
Press U or V to select which function to set.
6
Press [OK] . The screen for the function selected is displayed.
7
Press U or V to select whether or not to use sleep mode. Select
On
to set the sleep mode.
8
Press [OK] . Set the sleep mode for each function and
Status
menu
reappears.
Note
Sleep Level Set.
menu is not displayed when the optional Network Interface Kit (IB-50) or Wireless
Network Interface Kit (IB-51) has been installed.
Sleep Level Set.:
Exit
Status
01
Status:
Card Reader
Exit
03
USB Cable 02
01 Network
Item Default Value
Network (Network interface setting) On
USB Cable (USB interface setting) On
Card Reader (ID card reader setting) Off
RAM Disk (RAM Disk Mode setting)
Off
Parallel Cable (Parallel interface setting) Off
Note
Card Reader
is only displayed when the ID card
reader function has been activated.
Parallel Cable
is only displayed when the optional
Parallel Interface Kit (IB-32) has been installed.
Network:
Off
01
On
02
*
Note
Repeat steps 5 to 8 to set sleep mode for a different
function.