Kyocera ECOSYS P4040dn, Руководство по эксплуатации

Страница: 292 / 318

Appendix
A-18
Selecting the Right Paper
This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In
particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a
surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause such
paper to give off harmful fumes.
Bond paper should contain at least 80 % pulp. Not more than 20 % of the total paper content should consist of cotton or
other fibers.
Paper Sizes
Cassettes and the MP tray are available for the paper sizes listed in the table below. For details, including the paper sizes
for the paper feeder (Optional paper feeder PF-4100) refer to Setting the standard paper size on page 4-32 .
The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width. The angle at the corners must be 90°
±0.2°.
Yes: Can be stored No: Cannot be stored
Paper Size Size Cassette Cassette (PF-4100) MP Tray
Envelope #10 4.13 × 9.5 inches No No Yes
Envelope #9 3.88 × 8.88 inches No No Yes
Envelope #6 3.63 × 6.5 inches No No Yes
Envelope Monarch 3.88 × 7.5 inches No No Yes
Envelope DL 110 × 220 mm No No Yes
Envelope C5 162 × 229 mm No No Yes
Envelope C4 229 × 324 mm No No Yes
A3 297 × 420 mm Yes Yes Yes
A4-R 210 × 297 mm Yes Yes Yes
A4 Yes Yes Yes
A5-R 148 × 210 mm Yes Yes Yes
A5 Yes No No
A6-R 105 × 148 mm Yes No Yes
B4 257 × 364 mm Yes Yes Yes
B5-R 182 × 257 mm Yes Yes Yes
B5 Yes No No
B6-R 128 × 182 mm Yes No Yes
Folio 210 × 330 mm Yes Yes Yes
216 × 340 mm 216 × 340 mm Yes Yes Yes
Ledger 11 × 17 inches Yes Yes Yes