Konica Minolta IC-304 Plus Скачать руководство пользователя страница 74

Страница: 74 / 148

Chapter 2—Reinstalling the IC-304 Print Controller Software

2.5

Reinstalling the Software—Preservation Installation

The Software Preservation Installation mirrors the Software Complete Overwrite
Installation (including Windows XP operating system activation), but does not
affect the files stored on partition

. Use the Software Preservation Installation

option if a backup of partition

is not available, or when you want to reinstall the

operating system. This enables you to install a fresh operating system on partition

without deleting the user files on partition

. It will not preserve the current job list

on partition

. For this you must use the backup and restore option (see

Backing Up

and Restoring the Software

on page 31).

To reinstall the Software Preservation Installation, follow the flowchart described in

Reinstalling the Software—Complete Overwrite

on page 39. Make sure that DVD #1 is

in the DVD-RW drive; then from the

ColorServer Start Up

menu, select the

ColorServer Software Preservation Installation (System Partition Overwrite)

option.

You have completed Reinstalling the IC-304 print controller software.

Note:

To enable the restoration of customer settings and job data, we

recommend that you back up the IC-304 print controller configuration and
other information before loading the operating system, see

Backing Up the Color

Server System Partition

on page 57 and

Backing Up the Job List Database

page 33.

Important:

We recommend that you always disconnect the network cable

before installing software.

Note:

When performing the software preservation installation, after restarting

Windows XP operating system, the system performs the following actions:

•

The Norton Ghost software appears and copies the files.

•

The message

Image Disks FileSystem is Not formatted.

Press OK to format.

appears. Click

. The system automatically

stripes the disk, and then the Configuration Wizard appears.

Содержание IC-304 Plus





















































































































































Результаты поиска

Содержание IC-304 Plus

Отзывы:

Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 74 / 148

Результаты поиска

Содержание IC-304 Plus

Отзывы: