Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 110 / 148

94 Chapter 4—Hardware and Maintenance Repairs
5. Move the side cover outward and away from the server.
Figure 2: Removing the side cover
4.4.2 Returning the Side Cover
1. Verify that the server is off and that all external cables are disconnected.
2. Clear any cables that might impede returning the side cover.
3. With the server in the upright position, rest the bottom of the side cover on the
bottom rail of the chassis.
4. Align the slots in the side cover with the matching tabs in the chassis. Insert the
side cover into the slots.
5. Using the side cover handle, slide the side cover toward the front of the server.
6. Return the two screws that secure the side cover to the rear of the server, and
tighten.
7. Reconnect all external cables and power cords and turn on the server.
4.4.3 Removing the Front Panel
1. Review System Reliability Considerations on page 92.
2. Turn off the IC-304 print controller and all peripheral devices. Disconnect all
external cables and power cords.
Remove the two screws
Pull handle to release cover,
and slide out of chassis
Caution:
For proper cooling and airflow, return the side cover before
turning on the server. Operating the server for extended periods (more
than 30 minutes) with the side cover removed might damage server
components.