Konica Minolta IC-304 Plus Скачать руководство пользователя страница 52

Страница: 52 / 148

Chapter 2—Reinstalling the IC-304 Print Controller Software

To restore partitions

and

, press

. This option restores partitions

and

from a backup media.

Press Y to continue.

Press

to continue.

Follow the instructions in the message.

Press any key on your keyboard to continue.

Norton Ghost software copies the files on the DVD to partitions

and

When a confirmation message appears notifying you that the restore
process was successfully completed, remove the DVD from the DVD-RW
drive and press any key to continue.

The computer restarts automatically.

You have completed restoring the IC-304 print controller system partition(s).

Note:

If an error occurs during the restore process, a message appears

asking you to contact customer support. Press any key to continue.
The computer restarts automatically.

Содержание IC-304 Plus





















































































































































Результаты поиска

Содержание IC-304 Plus

Отзывы:

Konica Minolta IC-304 Plus, Руководство по обслуживанию, Страница: 52 / 148

Результаты поиска

Содержание IC-304 Plus

Отзывы: